Family-owned CSLB Lic. #1149716 · Insured Serving the whole Bay Area from San Jose
Mon–Fri, 8 am–6 pm Contact@bayviewgates.com
FAQ

Questions about gates, answered

Straight answers about installation, repair, openers, access control and fences. Can't find yours? Call us.

5.0 5-star rated on Google

General

How fast can you install a gate?

Most installations take one to two days on site. Custom-built gates add fabrication time, and we give you the full schedule with your quote.

Do you give a warranty?

Yes. All our work is backed by a warranty on labor and materials, and equipment carries the manufacturer's warranty on top.

Do you work with commercial gates?

Yes. We install and repair gates, barrier arms and bollards for businesses, HOAs, warehouses and industrial sites.

Do you install and repair all types of gate openers?

We install LiftMaster, FAAC, Viking and Eagle operators and repair most major brands, including swing, slide and barrier operators.

Can you upgrade my existing opener?

Yes. We can replace an old or undersized operator, add battery backup, smartphone control, intercoms or keypads, and bring safety devices up to current UL 325 requirements.

What areas do you serve?

The whole Bay Area: Santa Clara, San Mateo, San Francisco, Alameda, Contra Costa, Marin and Santa Cruz counties, plus parts of Sonoma and Solano. We're based in San Jose.

Gate Installation & Repair

How long does a new gate installation take?

Most residential installations take one to two days on site once the gate is fabricated. Custom fabrication, concrete curing and permits add time; we give you the full schedule with your quote.

Can you automate my existing manual gate?

Often, yes. The gate needs to swing or slide freely by hand, hang level and be strong enough for an operator. We check the hinges or rollers, posts and frame first and tell you if anything needs reinforcing.

Swing or sliding: which should I choose?

It depends on your driveway. Swing gates need clear space for the leaves to open and work best on level ground. Sliding and cantilever gates need room beside the opening but handle slopes and tight setbacks better. We'll recommend one after seeing the site.

Do you repair gates you didn't install?

Yes. We service swing, sliding and cantilever gates and most major operator brands, whoever installed them.

How long does a driveway gate installation take?

Most installations take one to two days on site once the gate has been fabricated. We schedule concrete and any permit inspections up front and give you the full timeline with your quote.

Do I need a permit for a driveway gate?

It depends on your city, the gate's height and how close it is to the street. Many Bay Area cities have rules on gate height and setback. We'll check your city's requirements and handle permits where they're needed.

Can you automate my existing gate?

Often, yes. The gate has to swing or slide freely by hand, hang level and be rigid enough for an operator. We check hinges or rollers, posts and the frame, and tell you if anything needs work first.

How long does installation take?

Most automations and new installations take one to two days on site. Custom gate fabrication adds time before the install.

How fast can you come out?

Usually the same day you call. Many repairs are finished on that first visit; bigger ones, like a failed operator or a damaged gate, can take a few days depending on the severity and the parts. If your gate is stuck open or closed, tell us when you call.

Do you repair all brands?

We repair most major brands, including LiftMaster, DoorKing, FAAC, Viking, Eagle, Elite and others. If an old operator is discontinued and parts aren't available, we'll tell you before you spend money on it.

Gate Operators & Motors

What's the difference between a gate opener and a gate operator?

Nothing, really. 'Operator' is the industry term for the motor and controls that move the gate; most people call it an opener.

How long do gate operators last?

It depends on the brand, how heavy the gate is and how often it runs. A correctly sized operator on a well-hung gate with regular maintenance lasts far longer than an undersized one fighting a sagging gate.

Will my gate work in a power outage?

With a DC operator and battery backup, yes, for a set number of cycles. Every operator also has a manual release so you can open the gate by hand.

Can you repair an operator brand you don't install?

In most cases. We carry common parts for the major brands and will tell you if a discontinued operator is better replaced than repaired.

Should I repair or replace my gate motor?

If the motor is a current model and the fault is a part (capacitor, board, battery, gearbox), repair usually makes sense. If it's old, discontinued or undersized for the gate, replacement is often cheaper over time. We'll give you both options.

How long does a gate motor last?

That depends on the brand, the gate's weight and how often it runs. A correctly sized motor on a free-moving gate lasts much longer than one that's overloaded.

Do gate opener services include a warranty?

Yes. New openers carry the manufacturer's warranty and our labor is covered by our own warranty on labor and materials.

Can you connect my LiftMaster gate to my phone?

Yes. Many current LiftMaster gate operators are myQ-compatible, and older ones can often be connected with an add-on. We'll check your model.

Do you repair older LiftMaster operators?

Yes. We repair current and many older LiftMaster units. If parts are no longer available, we'll recommend a replacement.

Do FAAC hydraulic operators need special maintenance?

Yes. Hydraulic operators need periodic checks of fluid level, seals and pressure settings, and underground units need their drainage kept clear. We service both.

Are underground operators a good idea in the Bay Area?

They work well when the box can drain. On sites that flood or collect debris, we'll recommend an above-ground option.

Why choose Viking over other brands?

Viking operators are designed for heavy gates and frequent cycling, which makes them a strong choice for HOAs and commercial sites. For a light residential gate, another brand may be more economical; we'll recommend what fits.

Do you repair Viking operators?

Yes. We diagnose and repair Viking controllers, motors and drives.

Are Eagle operators made in the USA?

Yes. Eagle Access Control Systems manufactures its operators in the United States.

Do you repair Eagle operators?

Yes. We service Eagle swing and slide operators and carry common parts.

Can you program new remotes to my gate?

Yes. We supply and program remotes, and can replace an old receiver if your remotes are obsolete.

What is a free-exit loop?

A wire loop cut into the driveway that detects a car's metal and opens the gate automatically for cars leaving the property.

Custom Gates

Can I request a completely unique design?

Yes. Bring photos, a sketch or just a description. We'll turn it into a drawing you can approve before fabrication.

Can you match my existing fence or house?

Yes. We match picket spacing, slat widths, finishes and colors, and can build a pedestrian gate and fence sections to go with a new driveway gate.

Wood or iron: which is better for the Bay Area?

Both work well. Iron (galvanized, powder-coated steel) is the most durable and secure; wood gives warmth and privacy but needs sealing every few years, especially near the coast. Aluminum and composite are the low-maintenance options.

Do custom gates come with a warranty?

Yes. Our work is covered by a warranty on labor and materials; we'll give you the terms in writing with your quote.

Are wood gates durable in Bay Area weather?

Yes, with the right wood and care. Redwood and cedar resist rot, and sealing every few years (more often near the coast or in full sun) keeps them looking good.

Can a wood gate be automated?

Yes. Our wood gates are built on steel frames so they stay rigid enough for an operator.

Do iron gates require maintenance?

Very little when galvanized and powder-coated. Rinse off dirt and salt, touch up any chips, and keep hinges lubricated.

Is it real wrought iron?

Almost all modern 'wrought iron' gates, including ours, are fabricated steel. It's stronger and more consistent than traditional wrought iron.

How long do composite gates last?

Composite doesn't rot or need repainting, so with a solid frame and hardware it lasts many years with very little maintenance.

Can composite gates be automated?

Yes. We build them on rigid metal frames and size the operator for their weight.

Are aluminum gates strong enough?

For most residential and light commercial uses, yes. For high-security or heavy industrial sites, we'll recommend steel.

Do aluminum gates rust?

No. Aluminum doesn't rust, which makes it a great choice near the coast.

Can you match my pedestrian gate to my driveway gate?

Yes. We build them together or match an existing gate's style, spacing and finish.

Can I open my pedestrian gate from my phone?

Yes, with an app-connected intercom or smart lock wired to a maglock or electric strike.

Fence Installation & Repair

What types of fences do you install and repair?

Wood, ornamental iron (steel), aluminum, composite and chain link, for homes, HOAs and commercial properties.

Do you handle both new installations and repairs?

Yes. We replace leaning posts, broken rails and damaged panels, and rehang or rebuild fence gates that drag or won't latch.

Are your fences weather-resistant?

Yes. We use galvanized and powder-coated steel, rust-proof aluminum, composite, and rot-resistant or treated wood, with posts set in concrete.

Can fences be customized to match my property's style?

Yes. Height, picket or slat style, color and finish can all be matched to your home and to any gates we build.

Do fences come with a warranty?

Yes. Our fences are covered by our warranty on labor and materials.

Do I need a permit for a new fence?

Many Bay Area cities require a permit above a certain height (often 6 or 7 feet) or for fences in front setbacks. We'll check your city's rules.

How long does a wood fence last?

A well-built redwood or cedar fence with good posts and occasional sealing can last many years. Posts are usually the first thing to go, which is why we set them carefully or use steel.

Should I stain my new fence?

Staining or sealing slows weathering and keeps the color. Many people let new redwood or cedar weather for a few weeks first.

Does an iron fence need painting?

Not if it's galvanized and powder-coated. Rinse it occasionally and touch up any chips.

Can an iron fence follow a steep slope?

Yes. Panels can be racked to follow the grade or stepped where it's too steep.

Is aluminum fencing strong?

It's strong enough for residential security and pool barriers. For high-security commercial sites, steel is the better choice.

Will aluminum fencing rust near the coast?

No. Aluminum doesn't rust, and the powder coat protects its color.

Does composite fencing fade?

Quality composite resists fading; some lightening in the first months is normal.

Is composite fencing strong?

Yes, when it's installed in a solid post system.

Is chain link good for residential use?

Yes, especially black vinyl-coated chain link for backyards, dog runs and side yards.

Can I add privacy to chain link?

Yes, with privacy slats or by planting along it.

Access Control Systems

What access control options do you offer?

Video and audio intercoms (including cellular and app-based), telephone-entry systems for multi-unit properties, keypads, card readers, remotes, exit loops and wands, maglocks and solar power.

Can I add an intercom or keypad to my existing gate?

Usually, yes. Most operators accept a standard 'open' input. We check your operator and wiring and tell you what's compatible.

Are access control systems suitable for businesses?

Yes. We install multi-user keypads, card readers, telephone-entry directories and cellular systems with user management and entry logs for offices, HOAs and industrial sites.

Do access control systems come with a warranty?

Yes. Our installation is covered by our labor and materials warranty, and the equipment carries its manufacturer's warranty.

Can I open my gate from my phone?

Yes. IP video and cellular intercoms come with apps for answering calls and opening the gate from anywhere.

What if there's no Wi-Fi at my gate?

A cellular intercom works on the mobile network, so you don't need Wi-Fi or a phone line at the gate.

Can I have different codes for different people?

Yes. Most keypads support multiple codes, and networked keypads add schedules and entry logs.

Wired or wireless: which is better?

Wireless is quick to add; wired is more reliable over long distances and for heavy use. We'll recommend one for your site.

Why won't my gate close?

The most common reason is a photo eye that's misaligned, dirty or blocked. Check for anything in the beam, wipe the lenses, and call us if it still won't close.

Are sensors required?

UL 325 requires entrapment protection for automatic gates, and current operators won't close automatically without monitored safety devices.

Is my older gate safe?

Many older gates predate current standards. We'll inspect it and recommend upgrades.

What is UL 325?

The safety standard for gate operators. It covers entrapment protection, monitoring of safety devices and usage classes.

What happens to a maglock in a power outage?

Standard maglocks release when power is lost. Battery backup keeps them locked for a while; we'll design for your security and exit needs.

Can a maglock be used on a driveway gate?

Yes, to hold the gate closed against wind or pushing, released by the operator when it opens.

Do solar gate motors work in all weather?

Yes, if sized correctly. Batteries carry the gate through nights and cloudy days; we size for Bay Area fog and winter sun.

How many cycles can a solar gate do?

It depends on panel size, battery capacity, gate weight and sun exposure. We'll size the system for your daily use.

Commercial & Industrial Gates

Do you install gates for businesses of all sizes?

Yes, from a single parking gate at a small office to multi-gate perimeters at industrial sites and HOA communities.

Can you repair existing commercial gates?

Yes. We repair commercial slide, cantilever, swing and barrier gates and most major operator brands, including track, roller, hinge and welding repairs.

Do you integrate access control with commercial gates?

Yes. Card readers, keypads, telephone entry, cellular intercoms, exit loops and fire department access can all be tied into the gate.

Are heavy-duty gates weather-resistant?

Yes. We use galvanized steel with powder-coated finishes and commercial-grade operators built for outdoor duty.

Can you handle permits and fire department requirements?

Yes. We coordinate permits and emergency access requirements with your city and fire department.

How quickly can you respond?

We prioritize commercial gates that are stuck open or closed. Call us and tell us the situation.

How wide can an industrial gate be?

Cantilever and bi-parting slide gates can span very wide openings. We'll design for your trucks and site.

Can gates handle constant use?

Yes, with an operator rated for industrial use and regular maintenance.

Barrier arm or full gate?

Barrier arms move traffic faster; full gates add security after hours. Many sites use both.

Can the arm hit a car?

Not when loops are installed and set properly; the safety loop keeps the arm up while a car is under it.

How deep are bollards installed?

Depth depends on the bollard and the protection you need; they're set in concrete footings below grade.

Are your bollards crash-rated?

Our standard bollards are concrete-filled steel for everyday protection. For certified crash ratings, we'll recommend an engineered system.

How do removable bollards lock?

Most lock into their receiver with a key or padlock; your staff remove them in seconds.

Do they leave a hole when removed?

No. The receiver has a cover that closes flush with the pavement.

Talk to us about your gate project

From new installations to reliable repairs, we provide trusted solutions across the Bay Area. Get a free, no-pressure quote.

Call Get a Free Quote