
Gate sensors that keep people and cars safe
Photo eyes, edge sensors and vehicle detectors are what make an automatic gate safe and convenient: they stop the gate when something's in the way and open it for cars leaving.
- Photo eyes and edge sensors
- Exit loops, wands and safety loops
- Set up to UL 325
Get a free quote
Tell us about your project. We'll call you back to set up a free on-site consultation.
Smarter safety, smoother operation
Sensors add safety to any automatic gate by detecting people and vehicles, preventing accidents and making exit automatic. Since the 2016 update to UL 325, operators must monitor their safety devices, so a missing or failed sensor can stop a gate from closing on its own.
We choose and position sensors for your gate's entrapment zones, wire them in conduit and test that the gate stops and reverses exactly as it should.

Sensors we install
Photo eyes
Infrared beams across the opening that reverse a closing gate.
Edge sensors
Pressure-sensitive edges that reverse the gate on contact.
Exit loops
Detect cars leaving and open the gate automatically.
Safety and shadow loops
Keep the gate from closing or swinging onto a car.
Exit wands
Probe-style vehicle detectors where cutting a loop isn't practical.
Repairs
Realignment, replacement and rewiring of failed sensors.
Your gate may have a sensor issue if it
A written, itemized quote before any work starts, and a warranty on labor and materials after.
Get a Free Quote- Won't close but opens fine
- Reverses for no reason
- Only closes when you hold the button
- Beeps or shows a safety fault
- Opens on its own (a loop fault)
Where sensors go on an automatic gate

- 1Across the opening
Photo eyes on both sides of the gate path.
- 2On the gate
Edge sensors on leading and trailing edges.
- 3In the driveway
Exit loop on the inside, safety loop under the gate path.
- 4For swing gates
A shadow loop in the swing area.
- 5Signs
Warning signs on both sides.
Recent projects
Tap any photo to see it full size.




Before & after


Photos marked “Representative image” are stock photos, and images with a small “i” are representative illustrations of this kind of work; all others show BayView projects.
From first call to finished job
- 1
Free consultation
Call or send the form. We ask a few questions, then visit to measure, check the slope, power and soil, and hear what you want.
- 2
Design & written quote
You get a clear recommendation, a drawing for custom work and a written, itemized quote. No pressure, no surprises.
- 3
Build & install
We fabricate, set posts and footings, hang the gate, install the operator and run wiring in conduit. Most installs take one to two days on site.
- 4
Test, train & support
We test every safety device, show you how to use and release the gate, and stay on call for service and warranty.
What our clients say
Excellent work syncing our residential gate and our side pedestrian gate to the same central master intercom system. The convenience of managing both access points from a single touch panel in the kitchen is life-changing. Great design team.
We needed an automated secure entrance for our private school campus. They installed a heavy-duty dual swing gate system paired with an authorized-personnel intercom system. They prioritized safety loops to ensure children are completely safe around the gate area.
Maxim and the entire BayView Automatic Gates team were fantastic to work with. They installed our new automatic driveway gate in Los Gatos, and the quality exceeded our expectations. Maxim was responsive, knowledgeable, and made sure every detail was perfect before the job was completed. The gate looks amazing and works flawlessly. I highly recommend them to anyone looking for a reliable automatic gate company.
Frequently asked questions
Why won't my gate close?
The most common reason is a photo eye that's misaligned, dirty or blocked. Check for anything in the beam, wipe the lenses, and call us if it still won't close.
Are sensors required?
UL 325 requires entrapment protection for automatic gates, and current operators won't close automatically without monitored safety devices.
What's a loop detector?
A wire loop cut into the driveway that detects a vehicle's metal, used to open the gate for exiting cars or keep it from closing on one.
Do sensors work in all weather?
Yes. We install outdoor-rated sensors and protect the wiring.
Related services

Talk to us about your gate project
From new installations to reliable repairs, we provide trusted solutions across the Bay Area. Get a free, no-pressure quote.
